Skip to content

Hall 4, Light valves

Eidophor

1939. Fritz Fischer, ETH Zurich, Switzerland. Prototype shown in 1943.

Also called: Oil film projector

Eidophor, on its stand.

The first television projector bright enough for a cinema screen used an electron beam to write ripples into a film of oil.

How it works

A powerful lamp shines onto a grille of mirrored bars. The bars reflect the light down onto a slowly turning mirror with a thin coat of oil. If the oil is smooth, the light returns straight to the bars and never leaves the machine.

An electron beam scans the oil and leaves a pattern of electric charge, which ripples the surface. Rippled oil bends the light slightly. On its way back, that light passes between the bars, through the lens and onto the screen. The deeper the ripple, the brighter the spot.

What to look for

The model shows the machine with its panels off. Follow the light from the lamp house at the left across to the bars. It goes down to the dish of oil, which turns under a glass bell, and back up through the lens. The top mirror then sends it to the small screen.

Good at

Fails at

Used for arena screens and control rooms until liquid crystal and micromirror projectors replaced it in the 1990s.

People

Fritz Fischer. Conceived the projector at ETH Zurich in 1939. A prototype was shown in 1943.

From the archive

Sources

Liquid crystal on silicon / Scanned laser

Museum of Alternative Displays / Index / People / About / Women in the museum / Black inventors and artists

English / Català / Deutsch / Esperanto / Español / Français / 日本語 / 한국어 / Português / 简体中文