Skip to content

Hall 1, Mechanics

Flip-disc display

1961. Kenyon Taylor, Ferranti-Packard, Canada, for Trans-Canada Air Lines.

Also called: Flip-dot

Flip-disc display, on its stand.

A pulse of magnetism flips each small disc on the board to show its bright face or its dark face.

How it works

Each disc turns on an axle and carries a small magnet. A short pulse of current through a coil underneath flips the disc to show its other face. The disc then stays in place with no current, so the sign uses power only while it changes.

The first big order was for the Montreal Stock Exchange. By 1977, roughly half of the major stock exchanges in the world used the system. It was later used for destination signs on buses, for highway signs and on television game shows.

What to look for

The bottom row counts the seconds and fills one disc at a time. Watch the columns flip one after another when the minute changes. Then switch the daylight off: the board still shows the time, but you cannot see it.

Good at

Fails at

LED signs have replaced it in new installations. Flip-disc boards remain in service, and some are hybrids with an LED in every dot.

People

Kenyon Taylor. Devised the flip-disc at Ferranti-Packard in Canada, for Trans-Canada Air Lines.

From the archive

Sources

Split-flap board / Mechanical television

Museum of Alternative Displays / Index / People / About / Women in the museum / Black inventors and artists

English / Català / Deutsch / Esperanto / Español / Français / 日本語 / 한국어 / Português / 简体中文