Skip to content

Hall 4, Light valves

Liquid crystal on silicon

1972. Grew out of the liquid crystal light valve developed at Hughes Research Laboratories, USA.

Also called: LCoS

Liquid crystal on silicon, on its stand.

A layer of liquid crystal lies directly on a mirrored silicon chip, so that light goes in and comes back out carrying the picture.

How it works

The chip carries a mirror and a drive circuit under every pixel. Light arrives through a glass cube that splits light by its polarisation, the direction in which the light vibrates. The light passes through the liquid crystal, reflects off the mirror and returns through the liquid crystal. Where the liquid crystal has turned the polarisation, the cube sends the light on to the lens. Where it has not, the light goes back toward the lamp.

The circuitry lies behind the mirror instead of between the pixels, so the pixels can be tiny and tightly packed.

What to look for

Follow the light. It goes from the lamp to the cube, down to the chip and back up. It then leaves through the lens and lands on the card as a picture.

Good at

Fails at

In the more expensive projectors, camera viewfinders and headsets. It also steers light in optical fibre networks.

From the archive

Sources

Digital micromirror device / Eidophor

Museum of Alternative Displays / Index / People / About / Women in the museum / Black inventors and artists

English / Català / Deutsch / Esperanto / Español / Français / 日本語 / 한국어 / Português / 简体中文