Skip to content

Hall 4, Light valves

Digital micromirror device

1987. Larry Hornbeck, Texas Instruments, USA. The first projectors built around the chip followed in 1996 or 1997.

Also called: DMD, DLP

Digital micromirror device, on its stand.

Microscopic mirrors cover a chip, one for each pixel, and each mirror tips toward the projection lens or away from it.

How it works

Every mirror has two positions. In one position it reflects the light of the lamp through the projection lens. In the other it reflects the light into an absorber. There is nothing in between. To make a grey, the mirror flips on and off thousands of times a second, and the eye averages the flashes.

Colour needs three chips, or one chip with a spinning wheel of colour filters, or coloured lamps that flash in turn. The single-chip kind can show brief coloured fringes on bright points that move fast. This is called the rainbow effect.

What to look for

The chip sits on the stand. Above it, the model shows a patch of its mirrors greatly enlarged, counting seconds. Turn the model: the mirrors that tip toward you look bright. Then switch the daylight off. The chip makes no light, so at night it disappears.

Good at

Fails at

In many cinema projectors and in many other projectors.

People

Larry Hornbeck. Invented the mirror chip at Texas Instruments in 1987.

From the archive

Sources

Liquid crystal display / Liquid crystal on silicon

Museum of Alternative Displays / Index / People / About / Women in the museum / Black inventors and artists

English / Català / Deutsch / Esperanto / Español / Français / 日本語 / 한국어 / Português / 简体中文