Skip to content

Hall 2, Glass and glow

Storage tube terminal

1968. Robert H. Anderson, Tektronix, USA, building on ideas of Andrew Haeff. The tube was refined at Tektronix from the late 1950s.

Also called: DVST, direct-view bistable storage tube

Storage tube terminal, on its stand.

This tube stores its own picture: a line, once drawn, stays lit on the glass with no computer memory behind it.

How it works

A writing beam of electrons draws lines as electric charge on a fine grid just behind the screen. A second, wide flood of electrons then covers the whole screen all the time. It reaches the glowing coating, the phosphor, only where the grid has been written. The picture is therefore stored in the tube itself.

That made detailed graphics affordable at a time when computer memory was not. The Tektronix 4010 terminal of 1972 sold for $3,950 and addressed 1,024 by 1,024 points. The disadvantage is that nothing can be removed. To change the picture, the terminal erases the whole screen with a bright flash and draws everything again.

What to look for

Watch one full cycle. The graph is drawn once and then stays. Next the screen flashes, which erases it, and the drawing starts again. The two wheels beside the keys move a crosshair, two crossed lines that mark a point.

Good at

Fails at

Replaced during the 1980s, when memory became cheap enough for raster graphics, in which the screen sweeps every line as a television does.

People

Robert H. Anderson. Developed the storage tube at Tektronix.

Andrew Haeff. Built the Memory Tube in the 1940s, the ancestor that Tektronix turned into a screen.

From the archive

Sources

Vector display / Nixie tube

Museum of Alternative Displays / Index / People / About / Women in the museum / Black inventors and artists

English / Català / Deutsch / Esperanto / Español / Français / 日本語 / 한국어 / Português / 简体中文