Skip to content

Hall 3, Solid light

Thin-film electroluminescent panel

1974. Commercialised in the 1980s by Sharp (Japan), Finlux (Finland) and Planar (USA).

Also called: TFEL, EL display

Thin-film electroluminescent panel, on its stand.

Thin layers on glass glow yellow at every point where two crossed conducting strips put a voltage across them.

How it works

A film of zinc sulphide with a little manganese added lies between insulating layers. Outside those layers are two sets of conducting strips, the electrodes, at right angles to each other. A high alternating voltage across any crossing excites the film at that point, and the film gives off a yellow-orange light. This effect is called electroluminescence.

The whole stack is solid and a few thousandths of a millimetre thick, and it contains nothing that can leak, freeze or burn out. Electroluminescent digits flew on the Apollo guidance computer and in Concorde, and they showed the floor number in lifts for decades.

What to look for

The model is an instrument panel, complete with its frame. Look at the colour of the display. No filter makes that colour: it is the light that manganese in zinc sulphide gives off.

Good at

Fails at

One manufacturer remains. Used where a screen must survive cold, vibration and decades of service.

People

Tuomo Suntola. Finnish physicist. In 1974 he devised atomic layer deposition, which grows a film one layer of atoms at a time, to make these panels.

Dawon Kahng. Born in Seoul. In 1968 at Bell Laboratories he showed that thin films of compounds like zinc sulphide glow when fast electrons strike metal atoms placed in them. These panels make light that way.

Sources

Quantum-dot display / Transparent display

Museum of Alternative Displays / Index / People / About / Women in the museum / Black inventors and artists

English / Català / Deutsch / Esperanto / Español / Français / 日本語 / 한국어 / Português / 简体中文