Portrait · Free STL & 3MF
Portrait Oval
Instax Mini frame
An upright oval frame with a floral surround composed for portrait photographs. Its curved opening gives centered subjects a different setting from the rectangular frames.
3MF: matching front and back on two plates.
STL ZIP: mat, ornament, back and import guide.
Two-color P2S pack · all eight designs with plate previews
Print settings and filament changes · Download all eight designs

Photo fit and dimensions
An oval crops all four corners of the image. Centered portraits work well; check the photo-fit drawing for faces or details near the edges. The film itself remains whole and loads from below.
About 73% of the image area remains visible through this opening. The complete film sheet stays uncut.
- Film
- Instax Mini · 86 × 54 mm, uncut
- Overall size
- 100.6 × 118.4 mm
- Assembled depth
- 13.5 mm
- Magnets
- Three 6 × 3 mm disc magnets
- Inner mat
- 0.68 mm · 7 supplied layers
- Estimated print time
- Front 3 h 20 min · back 55 min
v0.3.0 · Restored mat overflow. v0.3.0 upgrade guide. Revised fronts are digitally validated; physical checks are pending.
Times are slicer estimates for the supplied Bambu P2S / 0.4 mm profile. The shaped opening crops the photograph; the instant film stays whole.
Front, back and full-film fit
Make this frame
- Print the front and its matching back.
- Glue three magnets into the back pockets.
- Snap the front and back together; the clips may also be glued.
- Slide in the whole photo, narrow-border edge first.
- Place it on a magnetic surface.
Follow the illustrated assembly guide →
For other slicers, import the mat and ornament together as parts of one object, preserving their coordinates. Print the back separately. STL alignment and color-change guide.
Compare other shapes
New Rococo-inspired compositions developed with AI-assisted carving studies and custom CAD. Models are free under CC0, within the documented license scope.



Segmental Arch
Landscape Oval
Cushion Cartouche