Portrait · Free STL & 3MF
Segmental Arch
Instax Mini frame
A portrait frame with an arched upper rail and an ornamental crest. Its upright composition gives extra room above the photograph for the carving.
3MF: matching front and back on two plates.
STL ZIP: mat, ornament, back and import guide.
Two-color P2S pack · all eight designs with plate previews
Print settings and filament changes · Download all eight designs

Photo fit and dimensions
The arched top crops the upper image corners. Keep faces and other important details below the arch. The photo loads from the bottom, with its wide caption border trailing.
About 91% of the image area remains visible through this opening. The complete film sheet stays uncut.
- Film
- Instax Mini · 86 × 54 mm, uncut
- Overall size
- 102.6 × 114.5 mm
- Assembled depth
- 12.8 mm
- Magnets
- Three 6 × 3 mm disc magnets
- Inner mat
- 0.68 mm · 7 supplied layers
- Estimated print time
- Front 3 h 27 min · back 59 min
Reinforced mat · Period floral catalog. v0.3.0 upgrade guide. Revised fronts are digitally validated; physical checks are pending.
Times are slicer estimates for the supplied Bambu P2S / 0.4 mm profile. The shaped opening crops the photograph; the instant film stays whole.
Front, back and full-film fit
Make this frame
- Print the front and its matching back.
- Glue three magnets into the back pockets.
- Snap the front and back together; the clips may also be glued.
- Slide in the whole photo, narrow-border edge first.
- Place it on a magnetic surface.
Follow the illustrated assembly guide →
For other slicers, import the mat and ornament together as parts of one object, preserving their coordinates. Print the back separately. STL alignment and color-change guide.
Compare other shapes
New Rococo-inspired compositions developed with AI-assisted carving studies and custom CAD. Models are free under CC0, within the documented license scope.



Portrait Oval
Floral Corners
Canted Octagon